Desertdawg Posted November 7, 2004 Share Posted November 7, 2004 This is open to anyone, we are going to try to help Chris Rogers (yeah, that long lost Chris) get back on the road with his C4, there will be some general engine assembly, and whatever else we can break on his vette.Then we will clean up and cruise over to Glenn's "Marine B-day Party".You don't have to go to both events, but whats better than a day full of Corvette wrenching, and then off to party with the Marines : If your interested in either, or both events, just post here or on the CF in this thread.http://forums.corvetteforum.com/showthread.php?t=907977Let's get together and enjoy the great weather... Link to comment Share on other sites More sharing options...
Togo Posted November 7, 2004 Share Posted November 7, 2004 what time (if anybody's showing up) will you all be here?there really isn't much to do at this point, i need to pull a cam and lifters out of bill reid's old 355 motor and put in a more mild "almost stock" cam and lifters.that motor will then be going into the "silver bullet" in another few weeks time with all of your help of course! Link to comment Share on other sites More sharing options...
Togo Posted November 7, 2004 Share Posted November 7, 2004 i'm located in gilbert - val vista and ray-ishif you need directions, send me an email - chris_mail_az at yahoo.comthe build will go something like this i have a low mileage 355 i purchased from bill reid that needs a cam and lifter swap before anything else is done.seems like a quick fix - but i'm uneducated in how to line up the timing before removing the cam so that it cam be put back together easily not to mention, it was recommended to me that the cam be "degreed" does anyone know how to do this? as while it's out of the car, i'd like it to be close to perfect before the reinstall!then in the coming weeks, i'd like to solicit help to pull the old motor out and rerun all vacuum lines under the hood (as the A/C doesn't work properly and this will eliminate that as a problem) then reinstall the 355 that we put the new cam in - so i ask this - who's in?!?!?!?!i am pretty much available every saturday until this gets running - so any and all help would be appreciated!!!! Link to comment Share on other sites More sharing options...
Desertdawg Posted November 9, 2004 Author Share Posted November 9, 2004 Come on vette freaks, here's a chance to see the guts of a motor, and maybe even get dirty, plus you get to break Chris's stuff....I hope to be there about 9 or so.... : Link to comment Share on other sites More sharing options...
Desertdawg Posted November 12, 2004 Author Share Posted November 12, 2004 Well????I guess no one else is going???? Well, I should be there unless it rains enough to need a boat. : Link to comment Share on other sites More sharing options...
BSeery Posted November 13, 2004 Share Posted November 13, 2004 Ya know I will be there. A few other ACE members have sent me an IM asking when and where this was at. So, we may have a few others show up. Link to comment Share on other sites More sharing options...
Guest Kens06 Posted November 14, 2004 Share Posted November 14, 2004 Chris,PM me here or on Corvetteforum about the C4 Wolf Evolution cover!I had it in the for sale section for 3-18 packs of Busch Lite but since we met at Glenn's I'll reduce it to one!!Ken!! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now