ransome Posted June 16, 2016 Share Posted June 16, 2016 I need a Vintage air unit installed on a 1961 Corvette with ls motor , the compressor is already mounted into the accessory assembly . Just looking for the labor cost . If someone could recommend a shop or person , that would be great thanks Gregg Link to comment Share on other sites More sharing options...
Desertdawg Posted June 17, 2016 Share Posted June 17, 2016 I think Joe at Classic Gold auto could help ya. Tell him ACE sent ya and he'll double the price then give you half off . Classic Gold Auto Centre Link to comment Share on other sites More sharing options...
theChad Posted June 17, 2016 Share Posted June 17, 2016 Doug @Bromley's Corvettes would be my first guess for the classics. Or Joe @ Classic Gold Auto in Tempe. Link to comment Share on other sites More sharing options...
Bromley's Corvettes Posted June 17, 2016 Share Posted June 17, 2016 We are doing a ac install on a 67 bb right now. Just did a 79 we do ac on all year Corvettes. Link to comment Share on other sites More sharing options...
ransome Posted June 20, 2016 Author Share Posted June 20, 2016 How long does it take to install a vintage air system into c1 corvette Link to comment Share on other sites More sharing options...
Bromley's Corvettes Posted June 20, 2016 Share Posted June 20, 2016 Its pretty involved to do it real clean and neat. It takes days and then we get it all dialed in and tested then let it sit over night and test again in the morning be four we say its done. So do you already have the kit or just the compressor? We usually get the kit and do the whole install so I would have to figure out a price if you have some of the stuff. We also add a high flow elec fan in front of the condenser to keep air moving at low speeds. If you dont do that the ac will stop blowing cold when your stuck in traffic. High side presser goes up not good for compressor. Link to comment Share on other sites More sharing options...
ransome Posted June 20, 2016 Author Share Posted June 20, 2016 I have the evaporator kit , I already have a compressor installed in my accessory assembly i would need the condenser ,everything else should be in the kit Also the the original heater core and fan have already been removed http://www.vintageair.com/INSTRUCTIONS/58-62 Corvette/901047 REV A 11.1.10.pdf Link to comment Share on other sites More sharing options...
Bromley's Corvettes Posted June 21, 2016 Share Posted June 21, 2016 Ok bring it to us let us see what you got to work with:) Link to comment Share on other sites More sharing options...
LastC3 Posted June 23, 2016 Share Posted June 23, 2016 Don't forget to check with Vintage Iron ..... They've done many as well .... Give Mark a call ... (link below) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now