92ZR1Wannabe Posted October 13, 2013 Share Posted October 13, 2013 Please Note: The text below is a direct cut and paste from my craigslist ad. Price is lowered and negotiable for Aceholes! If you have any questions that I have not answered with the text below please feel free to PM me or txt me at 928-812-3951. All work on the truck has been performed by me, as such I can answer any questions you may have. I have sunk a ton of money into this truck however with my relocation to central Iowa I really don't want to see it rust into the ground. I have receipts for almost all items installed / replaced on the vehicle. Selling a 1982 Dodge Ram W150 4x4. This truck has been a long term project and is nearing completion however a relocation forces sale. This is a offroad toy / hunting vehicle and does both very well.*6" Sky Jacker suspension lift. (New springs all around).*35" BFG AT's (80%+ tread life)*Racho Nitro filled shocks.*360 Small Block / 727 Tranny / Dana 44 up front / Chrysler 9 3/4" in rear / 2 speed transfer case (2H / 4H / 4L)*Very sturdy (understatement) front winch bumper*Mile marker hubs*All new outer bearings and seals on both front and rear axels*Summit Racing headers, New true dual exhaust, Summit racing mufflers.*New Radiator*Brand New Dual optima yellow top batteries with Warn dual battery control kit / wired with 00 sized wire.*Brand New Holley Truck Avenger (670cfm) carb / edelbrock intake.*Warn VR10000 Winch (Brand new never used)*Cobra CB*New Carpet*Kenwood CD Player / 6" 2 ways in the door / 3 way 6x9's behind the seat*Summit Racing Electric gauges (Water temp / oil pressure / Volt / Tach)*Plugs / Wires / Cap / Rotor all new.*Toolbox*New gas tankThings that still need attention:The 360 is tired. Runs well just uses / leaks oil.The bench seat needs to be recovered (Tear on drivers side)The shifter needs a new bushing and has some slop in it.All in all this is a very solid off road platform, it is what you would expect from a offroad toy or hunting truck. Body wise it is very sturdy with only minimal surface rust / faded paint. Underneath is rust free.In addition to the truck the buyer will receive another 360 motor (disassembled) which will include the block, rods, pistons, crank, a set of worked and ready to go J heads (rebuilt with valve job / drilled and pressed valve guides / and new comp cams springs / retainers / locks). Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now