FS A&A Vortech T-Trim Kit C5 (Incomplete) $3500

[ChadC]

FS A&A Vortech T-Trim Kit C5 (Incomplete) $3500

...$3300 for my ACE Homies...

I have sold my C5 and now I am selling the Vortech kit that was on it.

What’s included with the kit:

-Vortech T-trim V2 WITH ZERO MILES ON IT. It had a minor rebuild performed by Vortech and in the box it has sat.

-8 rib pulley setup (incomplete, see below) with a 3.33” pulley on the Head unit.

- Ram air intercooler, with passenger side input pipe. Latest A&A style.

-Vortech BOV

-Truck loads of T-Clamps

-160* thermostat (for c5 water pumps ‘early style’ . LS2 water pumps, while a direct replacement cannot use this thermostat).

-Water pump gaskets

-Extra rubber 90* pressure hose.

-Extra 4” ID rubber cut to fit coupler (not pictured)

-Newer style Dongle from A &A

-Newer style Air Filter from A&A (not Pictured…. it was dirty, dirty girl :D)

-all Grade 8 bolts, washers, spacers for an 8rib system.

What is missing with the Kit:

-8rib system: harmonic balancer, power steering, Alternator and Solid mount Idler (fits in-between PS and HB) pulleys

-Engine oil feeding to the Supercharger head unit. Engine Block adaptor fitting, steel braded line, and the Low pressure Oil return line that goes back into the block.

-90* polished Input pipe from IC to MAF (with hole drilled for IAT)

- Black couplers that mate the Input pipe to the MAF, and to the TB. Qty2 4”dia.

-60LB injectors

-Walbro 255 fuel pump and/or BAP.

-One way check valve that connects with Brake Booster

-1/4” vacuum line that connects the BOV, to the system.

-PVC tubing that connects to the Air Filter from the Oil fill cap.

-Pin for the Crankshaft

-Radiator Cradle spacing kit (to lower the radiator)

-Air Shroud. The Tin metal sheet that fits above the radiator to prevent air from spilling over.

HISTORY: the kit was on the car for about 1500 mi. The head unit failed (Impeller seal started to leak oil). I removed the S/C kit and while the head unit was repaired by Vortech I sold the car.

Damage to the system:

I believe in being an honest seller and wanting to show ALL the imperfections, however minor.

The newer style dongle has a ’dent’ in it. I used a heat gun to make this crater to clear my stock hood.

The coupler that I used to attach the S/C to the Dongle has an angle cut, and may not fit your application.

The side panel for the ram air kit has a chemical stain. This is cosmetic only. I spilled some Simple green on it and did not know about it for a few months.

Forms of payment:

-I prefer Cash and a handshake if you are local or find someone local.

-Buyer pays shipping. I’m guessing from $60 to $150. I already have a box ready.

- I do take Credit cards. Please add 4.5% and 4 business days to process.

-I do take checks. Please add 5 business days for funds to clear.

For quickest response please email me at ccarpenter@Futurenetaz.com

Cheers

Chad

[Ted Y]

Good luck on the sale!

[jagoff]

will you take anything besides money?

[ChadC]

will you take anything besides money?

send me a PM of what you have in mind

[Big Poppa]

I have this really cool ring I'll trade ya....

[ChadC]

I have this really cool ring I'll trade ya....

unless this ring can make me invisible so I can pee in people's closets..then no im not interested.