un even head lamp

[Dvl4evr]

I was just over @ my neighbors house & he has a 99 torch red coupe. He's got 1 head lamp even with the nose cone & the other is lower by approx 16th of an inch. I thought that if you manually raise the lamp, it would stay @ that position, but I was wrong. Anybody know how to raise the lamp for good?

Jim

[nort99]

I was just over @ my neighbors house & he has a 99 torch red coupe. He's got 1 head lamp even with the nose cone & the other is lower by approx 16th of an inch. I thought that if you manually raise the lamp, it would stay @ that position, but I was wrong. Anybody know how to raise the lamp for good?

Jim

I had that with my 98, I would adjust the knob to rase the light to make it even with the body and it would stay that way until you would turn on the lights then when you shut it off, it would go back to being to low. I finally made the adustment with the hood bumpers stops in the front of the hood. The one side was up to high. It was not the light that was to low. If I remember right there are two adjustment bumpers by the light that the hood rest on. Hope this helps?