Robert and Elizabeth Posted March 7, 2007 Share Posted March 7, 2007 Well, after seeing so many cute and imaginative license plates on the Gila Bend cruise, we decided to get one for our Z. We chose: PDQWK on the ASU styled plate. It stands for "pretty darn quick". With the ASU plate, you are limited to only 5 letters, so we have been back and forth on what to put on it. So, Robert came up with this one and I liked it. We just have to wait and see if it gets approved. Next, we got the large CAM installed on the Z, but the headers are on back order for 2-3 wks. We will just have a base tune by Nic, and will do the performance tune when we get the headers/full exhaust put on. Also, we have decided to have the heads ported, so that may happen at the same time as the header install. When all is said and done, we should be good for around 600HP at the wheels and around 700+ at the motor. That darn Mike at AZPS is sure a good salesman! How could anyone resist those kinds of numbers! I guess our next purchase will be the Hoosier DRs that just came out in our size since we will probably have issues again with traction on the pilot sports. More on this later... Link to comment Share on other sites More sharing options...
Bigfoot Posted March 7, 2007 Share Posted March 7, 2007 Wow...lots o' goodies. Just wish I had the cash for that kind of stuff. Link to comment Share on other sites More sharing options...
1EvilC5 Posted March 7, 2007 Share Posted March 7, 2007 Way to go Great job on the vanity plate name. Have fun with the new HP, Phil... Link to comment Share on other sites More sharing options...
VetteTax Posted March 7, 2007 Share Posted March 7, 2007 Congrats!! Stay safe!Dan Link to comment Share on other sites More sharing options...
Scratch Posted March 8, 2007 Share Posted March 8, 2007 nice stuff Link to comment Share on other sites More sharing options...
Eddie44 Posted March 8, 2007 Share Posted March 8, 2007 I can see a Club Day at SpeedWorld in your future Link to comment Share on other sites More sharing options...
Guest UVETTYA Posted March 8, 2007 Share Posted March 8, 2007 Wow, congrats on the plate and the HP! Whew!That's all I can say! Link to comment Share on other sites More sharing options...
CorvetteGrammy Posted March 8, 2007 Share Posted March 8, 2007 Vanity plates are fun.....hope you get yours.......mine came about because every one said my car was "gorgeous" but I always felt like "Grrr" ,a tiger, when I drive my vette... soooo, My plate says "GRRRJUS". It works for me.....Drive Safe... Link to comment Share on other sites More sharing options...
Bigfoot Posted March 9, 2007 Share Posted March 9, 2007 Vanity plates are fun.....hope you get yours.......mine came about because every one said my car was "gorgeous" but I always felt like "Grrr" ,a tiger, when I drive my vette... soooo, My plate says "GRRRJUS". It works for me.....Drive Safe... I like that....that's cool. Link to comment Share on other sites More sharing options...
P51tj Posted March 9, 2007 Share Posted March 9, 2007 Link to comment Share on other sites More sharing options...
Kyle Posted March 9, 2007 Share Posted March 9, 2007 Nice.... Link to comment Share on other sites More sharing options...
Mark321 Posted March 10, 2007 Share Posted March 10, 2007 Well, after seeing so many cute and imaginative license plates on the Gila Bend cruise, we decided to get one for our Z. We chose: PDQWK on the ASU styled plate. It stands for "pretty darn quick". With the ASU plate, you are limited to only 5 letters, so we have been back and forth on what to put on it. So, Robert came up with this one and I liked it. We just have to wait and see if it gets approved. Next, we got the large CAM installed on the Z, but the headers are on back order for 2-3 wks. We will just have a base tune by Nic, and will do the performance tune when we get the headers/full exhaust put on. Also, we have decided to have the heads ported, so that may happen at the same time as the header install. When all is said and done, we should be good for around 600HP at the wheels and around 700+ at the motor. That darn Mike at AZPS is sure a good salesman! How could anyone resist those kinds of numbers! I guess our next purchase will be the Hoosier DRs that just came out in our size since we will probably have issues again with traction on the pilot sports. More on this later...Good Luck... AZ MVD has turned me down on my last 6 requests Link to comment Share on other sites More sharing options...
Robert and Elizabeth Posted March 10, 2007 Author Share Posted March 10, 2007 Well, after seeing so many cute and imaginative license plates on the Gila Bend cruise, we decided to get one for our Z. We chose: PDQWK on the ASU styled plate. It stands for "pretty darn quick". With the ASU plate, you are limited to only 5 letters, so we have been back and forth on what to put on it. So, Robert came up with this one and I liked it. We just have to wait and see if it gets approved. Next, we got the large CAM installed on the Z, but the headers are on back order for 2-3 wks. We will just have a base tune by Nic, and will do the performance tune when we get the headers/full exhaust put on. Also, we have decided to have the heads ported, so that may happen at the same time as the header install. When all is said and done, we should be good for around 600HP at the wheels and around 700+ at the motor. That darn Mike at AZPS is sure a good salesman! How could anyone resist those kinds of numbers! I guess our next purchase will be the Hoosier DRs that just came out in our size since we will probably have issues again with traction on the pilot sports. More on this later...Good Luck... AZ MVD has turned me down on my last 6 requestsWhen and how do we find out if it has been approved/not approved? This is our first personalized plate, so we are very unfamiliar about the process. Link to comment Share on other sites More sharing options...
Eddie44 Posted March 10, 2007 Share Posted March 10, 2007 When and how do we find out if it has been approved/not approved? This is our first personalized plate, so we are very unfamiliar about the process.You'll either get your plate in the mail or a reject letter. I suppose you could guess that it was approved if you continually went to the ServiceAZ website and checked to see if that plate was available. I'm sure as soon as they issue it you'd get a "already taken" from that site. Link to comment Share on other sites More sharing options...
Robert and Elizabeth Posted March 10, 2007 Author Share Posted March 10, 2007 When and how do we find out if it has been approved/not approved? This is our first personalized plate, so we are very unfamiliar about the process.You'll either get your plate in the mail or a reject letter. I suppose you could guess that it was approved if you continually went to the ServiceAZ website and checked to see if that plate was available. I'm sure as soon as they issue it you'd get a "already taken" from that site.It is showing up on Service Arizona as "not available", so I guess we were approved! Yippee! Link to comment Share on other sites More sharing options...
nort99 Posted March 11, 2007 Share Posted March 11, 2007 Congrats. Link to comment Share on other sites More sharing options...
Grayeagle Posted March 11, 2007 Share Posted March 11, 2007 -cool- -evil grin--Frank Link to comment Share on other sites More sharing options...
Loud Pedal Posted March 11, 2007 Share Posted March 11, 2007 When and how do we find out if it has been approved/not approved? This is our first personalized plate, so we are very unfamiliar about the process.You'll either get your plate in the mail or a reject letter. I suppose you could guess that it was approved if you continually went to the ServiceAZ website and checked to see if that plate was available. I'm sure as soon as they issue it you'd get a "already taken" from that site.It is showing up on Service Arizona as "not available", so I guess we were approved! Yippee! Not necessarily. My first choice showed not available. In fact it still does, but it was denied. Good luck though! Link to comment Share on other sites More sharing options...
Robert and Elizabeth Posted March 26, 2007 Author Share Posted March 26, 2007 Great news....we got our vanity plate yesterday in the mail!!! "PDQWK" on the ASU styled plate is officially on the Z!! Yippee!! :D Link to comment Share on other sites More sharing options...
Buccaneer Posted March 26, 2007 Share Posted March 26, 2007 Congrats on both!! Hope you get your palte and I know you'll LOVE the HP. I also hope my plate goes through. :D I just checked and my plate is not available now. So I don't know if that means its just in approval status or it actually was approved. Link to comment Share on other sites More sharing options...
nort99 Posted March 26, 2007 Share Posted March 26, 2007 Great news....we got our vanity plate yesterday in the mail!!! "PDQWK" on the ASU styled plate is officially on the Z!! Yippee!! :DGreat, what does it stand for again. :D Link to comment Share on other sites More sharing options...
Bigfoot Posted March 26, 2007 Share Posted March 26, 2007 congrats. Link to comment Share on other sites More sharing options...
nort99 Posted March 26, 2007 Share Posted March 26, 2007 I scrolled up and found it... now my I am wore out from going that far up. :D Link to comment Share on other sites More sharing options...
P51tj Posted March 26, 2007 Share Posted March 26, 2007 Link to comment Share on other sites More sharing options...
ICULUKN Posted March 26, 2007 Share Posted March 26, 2007 very cool. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now