joe@cpr.com Posted June 27, 2017 Share Posted June 27, 2017 Pete brought us his Z with a setup already installed, it broke a lifter that we determined was caused by the pushrod length being extremely far off. His setup was as follows when it came. TSP short block 427 still with flat top pistons with -3cc reliefs. TSP ported stock heads milled 50 Huge cam 255/263 .660/.660 110 lsa with stock rockers, all the guides were destroyed in 4k miles from that much lift on stock rocers kooks 1 7/8 fast 102/102 halltech intake (maf forward) 13:5:1 compression e85 614/542 run conditions were 75 degrees New setup. guides replaced in the heads and fixed. cpr alpha cam lift is way less so guides won't get beat up and cam is smaller overall arh 2'' longtubes msd manifold (out of the box) 624/548 run conditions were 119 :rofl: oh and proper pushrod length! He now has a setup that not only makes more power in worse conditions, but drives much smoother, won't grenade the guides, and has a much flatter power band. If we could change everything we would swap out the heads for a set of wcch and port the msd but i think this thing is doing pretty well :D https://www.youtube.com/watch?v=MujlD0j07zM Quote Link to comment Share on other sites More sharing options...
dwdrummer Posted June 27, 2017 Share Posted June 27, 2017 Nice. you guys do great work over there. Quote Link to comment Share on other sites More sharing options...
joe@cpr.com Posted June 27, 2017 Author Share Posted June 27, 2017 7 minutes ago, dwdrummer said: Nice. you guys do great work over there. thank you! Quote Link to comment Share on other sites More sharing options...
Guest badbobs95 Posted June 27, 2017 Share Posted June 27, 2017 1 hour ago, joe@cpr.com said: thank you! That's how I would have built it!!!!!! Quote Link to comment Share on other sites More sharing options...
joe@cpr.com Posted June 27, 2017 Author Share Posted June 27, 2017 53 minutes ago, badbobs95 said: That's how I would have built it!!!!!! I always think WWBD usually works out well what would bob do! Quote Link to comment Share on other sites More sharing options...
Recommended Posts