Jump to content

C6 Grand Sport - Full Paint Correction - Wheels Pulled - Nano Ceramic Paint Coating


Wills.WindowsAndWheels

Recommended Posts

Wills.WindowsAndWheels

Black....Corvette.....C6. Oh yes, this felt like the old days here! It's been a while since I posted up here, but wanted to share this beauty with you guys.

CD64796E-D7A1-4F55-9AFE-066556D7CB72_zps


Oh yeah, swirled like a Dairy Queen ice cream cone as well....you know it.

F5FA3892-C479-4B67-AC95-359F8278CBA9_zps


Our attitude...lets do it! (Later followed by...lets kill ourselves, what did we get into!)

This was the last year the C6 Grand Sports were made (2013) - and while she had very low mileage and was kept very clean, the paint was definitely in need of some serious reconditioning.
We did a full walk around and pretty much every panel looked the same.

CF00C0BA-81BA-47A3-8D01-AB775ED7EF0E_zps

742618E2-8A5D-4C19-8AAB-C3021EF9D4D9_zps

DA9FC119-BF84-4F7C-822F-70046BB3F767_zps

FB3BBB46-55B0-4FD5-B0C3-7CBBEC48E249_zps

4B02DFE2-C066-40DB-A6EA-278983AD93D7_zps

142C1C5C-3C32-43B3-ABDC-1683D97DA353_zps

Ouch right?

3964AA6B-F66F-4F2F-A605-AAE21B7F27A1_zps

210FDC2F-1917-4DE4-A409-861F92502B63_zps

Typical heavy wear area....no matter how careful you are this area always seems to get damaged from loading and unloading.

9FE0F54F-5891-4493-B7C9-8A0980EFF277_zps

Some light water spots were also sprinkled in with all the swirls:

324A3A58-F139-4BB6-980B-35285065A979_zps

982E3E31-8026-4282-92FB-893397228331_zps

Bit of a deep one here:

94EC37D4-ABA5-4BF6-B246-60385FBBC82F_zps

A0CB6E8B-AEB4-46AF-BEE4-9347B1CAFEB3_zps


Alright! So, now we know what we're looking at. After taking a look at the car together and then discussing the differences between our Stage 1, Stage 2 and Stage 3 correction options - the owner decided if he was going to do it he was going to do it right. Stage 3, wheels pulled and coated and Nano-Ceramic coating on the paint to lock in that soon to be gorgeous finish.

We went ahead and scheduled for this Grand Sport to stay with us for a week. Between the condition of the car, the fact it was black, and that we we've now entered into 110 degree weather here in AZ, we knew this was going to be a doozy!


Now while I usually have quite a few "in action" pics we only have a few this time. Here are Henry and Noah working the back end of this baby. Our cut consisted of M100 and M205 on either a Megs Finishing microfiber pad or a Megs burgundy cutting disc. 

85A851BE-9248-4CAD-8E18-DF6C3A6668D6_zps


You'll likely notice the white marks through out the side of the car...kind of like what a surgeon does prior to operating. Well, thats pretty much what we're doing here. Marking areas of concern, areas that need a 3" cutting pad used because the 5" didn't get into certain spots well enough and so on. 

Now while M100 is an awesome product...the major draw back is...the dust!

8A9CEED4-ED36-44C4-81F6-B614A49D661E_zps

71BF4AB9-6369-410B-B5CF-B72951A8F826_zps

It just gets to a point where you don't try to wipe it all off, you don't try to fight it, you just accept it is part of the process and keep moving. We recently had a fellow detailer move out here from New Hampshire  (Paul from Looks So New Detailing) and aside from the obvious blistering heat that wears you down, the other note he made was on the amount of dust and how quickly your pad CAKES up out here compared to the nice cool climate he was use to. Needless to say, you also inevitably destroy a pad here and there as well, even though we try to change them out quite often to avoid over heating.

D6675EF5-5A41-4AAF-9FA6-CC52E4BD907B_zps


As you can see though, even through all the dust, the swirls were taking beating! Our QuickJack pulled its weight (pun intended?) as always by getting the low stuff up to chest level and making it much easier to see what it was we were working on (comparatively speaking).

Now when a vehicle gets this dusty again from the cutting/compounding process, really the only way to make sure as much of the dust is removed as possible, is to re-wash the car.
We opt to do this BEFORE the final polishing step so that if any light wash marring were to happen while the paint is bare and unprotected like this, it wouldn't matter much since we still have the final polishing step left to go anyway.

Once the vehicle was fully cut (or so we thought) and the re-wash was complete, it was time to pull the wheels and get them cleaned up.

20DEF94A-5978-4E14-962F-826EFE37571E_zps

66F4CE43-0852-4D0C-AF2D-D0BCF865DCBC_zps

1FDEECD9-4E00-4C80-A5E9-6DFC1901F06E_zps


Brake dust combined with AZ dust combined with....whatever. It was dirty, thats all we knew!

A nice bath in Iron-X along with some good ole' patience cleaning all the spoked areas and hard to reach places left these babies looking like new again. Once coated...they were gleaming.

A4926874-C7BC-4452-9FD7-9F252CB14459_zps

8AE79696-EB62-4E85-9CC3-115B441CDBD8_zps

Of course while the calipers were exposed (along with the fender wells) they received some major TLC as well. Here's Daniela applying a caliper coating after the fender wells had been detailed and dressed.

A8A9C4BE-2940-4D4A-A351-C4171C84DE57_zps

1DD62FA9-3A25-4C6D-B246-D94C9564C605_zps


Installed and looking like a boss:

804F81B6-4BFC-428A-87A7-6A387CBEDDCC_zps



Now as I said, we thought we were done cutting, but there were a few RIDS that required a bit of additional attention, however these spots were few and far between and corrected fairly easily.

Once the spot cutting was complete, it was time to dial in that final polishing step and make this paint look dripping wet.

Essence with a green Buff n' Shine pad worked well in most areas. A CarPro Gloss pad was used for the 3" work and Megs Yellow and Black pads were used for the 1-2" Nano work.

Henry can be seen here touching up some of the super light marring that was left in some spots using the Rupes Nano.

E1FD5AF0-7440-40C0-9147-D23B42BA4CB6_zps

This shot was one of my favorites. Wheels re-mounted, final polishing completed and looking like a glowing onyx under all of our LED lights.

886FDAA8-D961-448B-AC58-7FC6F90AD7B0_zps

While she was still lifted and in a fairly comfortable position for lower work, I took the opportunity to work on the exhaust tips:

3CBFD7DC-D83C-4D6A-AA3E-9892D0F990CD_zps

0383F66F-0738-4BB3-95D3-CDC317B0C905_zps

Always a must do for a final touch of clean.



As a final work of art for the wheels, we plasti-dipped them a bright neon green. It was a little blotchy but its ok.

A9D8377D-9D32-48BD-B575-BC68E69AE07D_zps


Hopefully you're all done ranting in your heads by now lol....this was actually just the reflection of the foam pad we use to sit on. You can see it in the reflection of the paint here:

7CC97950-EC78-4E6E-BEE3-8DB24D76BFB4_zps

When I was sorting through all the uploaded pictures and came across this one I asked Dani, "Did you put these pictures in the wrong folder?" Thats when she informed me as to what happened there lol.

One of the notorious areas on these vettes, is the rear fender flare which begs to be washed too aggressively and is tricky to get into the deepest part of the curve. The light marring that remained after final polishing was minuscule to say the least. 
Even we had a hard time spotting it, but the fact of the matter was, we spotted it so therefore it had to go! The Rupes 75 pneumatic was the best tool for this little area (once I was done using it on a headlight restore i was working on lol) and as you can see...this is about as close to perfect as you can humanly get.

99D63D35-B2D5-449E-A9F7-40CE66E78970_zps

30712BD0-0DF4-4403-9B91-CA1377D7E07F_zps

Lowered back down and ready to received two coats of CQuartz Professional...for that wet look that would match the sweat dripping off our foreheads lol.

30712BD0-0DF4-4403-9B91-CA1377D7E07F_zps

40571270-08AB-458F-B814-FE4348B8A292_zps

Even without a coating, this baby looked great:

C940521F-D41E-4A53-94AC-AB04C7E5C05B_zps

Front bumpers suck, but other than some pitting...it turned out looking right:

94A3BF9B-E56B-49BC-9CB9-3443708F535F_zps

0252440E-B275-4C25-A126-EBF4DA5B0DF3_zps


Now once the coating is complete, its a must to do a final walk around. Open up the doors, hatch and hood - inspect every nook and cranny (especially after such an extensive compounding session).

B3422A6F-3620-49F0-9756-7AA37443680E_zps

8DD2CEB9-85E0-4E7F-8D19-29F7D55050A5_zps


Got the Infra-red lights baking my ass while i do it hahaha. Quite possibly the most redundant thing we've done, IR cured a coating when its literally 110 outside.

F1A467A1-4454-47F0-8CD0-57672A207777_zps

But, whatever, its the right way to do things, especially on the sides and lower panels.

Once the curing and final detailing was completed...this Grand Sport looked outstanding.

B8DE49C9-D109-40D6-A08F-4478B263C4CA_zps

74F196F0-D627-4478-81F8-371F96FF77F2_zps

Like you could just reach right into it...

5342B983-6303-4751-9EFE-CBF061AAFFD9_zps

7950A51E-87F0-4309-B274-C9D3B770A655_zps


See how those shiny exhaust tips just tie everything in!

1BFAA64A-E00B-4D94-BDF7-F4661BD5EF40_zps

34640268-4885-4FF2-A078-D775C8AA5F38_zps


And the 6th Man award for this detail goes to...

2A404F9C-8F33-4A95-8FD8-73158B976EFD_zps

Our newest addition to the shop, our monstrous Port A Cool portable evap cooler. After having priced out dropping an A/C unit to cool the shop down and realizing that it just wasn't going to happen....we decided to start hunting for alternative options.
Even tho it's a portable evap, these bad boys were still pretty pricy brand new. However, after doing some hard core hunting on Offer Up of all places, we found this baby brand new and got it for a good price. During the 105 and lower days, the inside of the shop is out right comfortable. Once it creeps to 110+, even with the PAC going it's still a bit warm inside the shop, but easily 15-20 degrees cooler compared to outside.
I can't speak for more humid climates, but if you're in a hot/dry climate like us and you're looking for an affordable cooling option, I'd highly recommend one of these. Even the up stairs of our shop was cooled.


When the owner came to pick up - he walked into the shop and liked what he saw, but when Daniela asked him "What do you think"...he said very wise words. "Well, I'd really like to see what it looks like out in the sun."
Smart man. You've got it!

BD712875-D12B-4D08-9D87-4C368DCC4432_zps

50102651-B20C-4FB9-8153-39048250F8C2_zps

1E099AB3-4730-4312-A97A-A487E1FFF615_zps

One little, two little, three little sun shines.

Reflections were outstanding as well:

9B7B1987-FB57-44F3-926A-833543E49699_zps

ADF1E8C7-0015-4C2B-AD56-EBCBBA9EEDBE_zps

25815C99-8764-40F2-B7FE-D4C5FBFA261F_zps

The license plate was quite appropriate ....since all the swirls had "Gone on By" once we finished up.

EDF9B7B7-F6E3-42E1-B774-3D6875D2A687_zps



It was a long battle, as always with black - and also brought back many memories of when our detailing days had first started, well before the newer C7's had been released and every Vette we worked on was this notoriously hard to work with C6 paint. 
But just like we did back then, we came out on top. A bit tired, but on top. 

As always, I hope everyone enjoyed the journey and the pictures that went along with it. Questions and comments are always welcome and we really appreciate those of you who have been following us on Facebook and Instagram (I'll post links below if anyone is interested).

www.Facebook.com/WindowsAndWheels
Instagram - 
www.Instagram.com/WindowsAndWheelsDetailingAz

Thanks all!






 

Link to comment
Share on other sites

Guest badbobs95
42 minutes ago, dwdrummer said:

Wonder how much something like this would cost?

 

$20,000.00  Teeheehee  Great job there! You know your stuff!

Link to comment
Share on other sites

Have you ever looked into Menzerna products? They have a full range of products for every occasion but their compounds are much less dusting compared to M100 and M105. Plus they work longer in heat. 

 

Nice results, BTW.

Link to comment
Share on other sites

36 minutes ago, badbobs95 said:

 

$20,000.00  Teeheehee  Great job there! You know your stuff!

Divide by 8 or 10, I'd guess. These guys all dedicating a week on a car...

Link to comment
Share on other sites

Guest badbobs95
8 hours ago, Ted Y said:

Have you ever looked into Menzerna products? They have a full range of products for every occasion but their compounds are much less dusting compared to M100 and M105. Plus they work longer in heat. 

 

Nice results, BTW.

 

I heard great things about Menzerna so I bought a gallon of their rubbing compound to see if it was true. I don't know why but I ended up throwing 3/4 of it away. It dried so fast, it was a bitch trying to rub it off. But I kept trying and got the same results every time. Maybe it was old stock.

Link to comment
Share on other sites

9 minutes ago, badbobs95 said:

 

I heard great things about Menzerna so I bought a gallon of their rubbing compound to see if it was true. I don't know why but I ended up throwing 3/4 of it away. It dried so fast, it was a bitch trying to rub it off. But I kept trying and got the same results every time. Maybe it was old stock.

You're supposed to rub on a car.

Link to comment
Share on other sites

12 hours ago, badbobs95 said:

 

$20,000.00  Teeheehee  Great job there! You know your stuff!

I was talking about the detail price... not the price of the car.  teeheehee?

Link to comment
Share on other sites

Wills.WindowsAndWheels
18 hours ago, Extender32 said:

Very nice!

 

Thank you! How've you been man..its been a while.

 

18 hours ago, JohnU said:

Wow, nice work.... almost makes me want another black vehicle......NOT!   :)

 

Haha, amen to that. One of my guys said after we finished this Vette... " You know, after working here, on thing I've decided is I will NEVER own a black car."

 

17 hours ago, dwdrummer said:

Wonder how much something like this would cost?

 

We really do things on a case by case basis since there are a lot of variables to consider. Our paint detail and paint correction packages start at $500 and go up depending upon what all gets added on with it.

 

16 hours ago, badbobs95 said:

 

$20,000.00  Teeheehee  Great job there! You know your stuff!

 

You know whats up Bob! lol. Eh I wish, but nevertheless it was fun to see such a nice turn around. Black is hard but sure looks nice when complete.

 

15 hours ago, Ted Y said:

Have you ever looked into Menzerna products? They have a full range of products for every occasion but their compounds are much less dusting compared to M100 and M105. Plus they work longer in heat. 

 

Nice results, BTW.

 

I've used a few of them...it was definitely less dusting compared to M100, but still was enough to where on a full correction job (esp. in the summer) we would need to re-wash the car. So due to that we've stuck with Megs for our compounds. 
I really miss HD Adapt, it was a really good product but got discontinued earlier this year unfortunately.

 

7 hours ago, badbobs95 said:

 

I heard great things about Menzerna so I bought a gallon of their rubbing compound to see if it was true. I don't know why but I ended up throwing 3/4 of it away. It dried so fast, it was a bitch trying to rub it off. But I kept trying and got the same results every time. Maybe it was old stock.

 

Had the same happen with a couple of my bottles as well. Either that or it would get very clumpy and clog up and I'd spend more time just trying to get it out of the bottle than I would actually using the product! I just ordered a hand full of some other compounds to try out and compare to what I have. 

 

7 hours ago, Ted Y said:

You're supposed to rub on a car

 

Ah thats how it works :-D 

3 hours ago, dwdrummer said:

I was talking about the detail price... not the price of the car.  teeheehee?

 

I know some guys that get into 5 figure "details", but really at the level of work they do it's far beyond a detail. Typically includes disassembly, orange peel removal via multiple grit wet sanding followed by full correction. Usually a months worth of work. That or there are concours details for Pebble Beach and other similar competitions that go into the 5 figure range, but again you're talking a full month and 100's of hours on one car. Pretty crazy stuff. 

Link to comment
Share on other sites

Doing well and enjoying my ZR1 of course.  I break out the Meguires and my Porter Cable about twice a year to remove the light swirl marks, but nothing in great as detail as you go to.

Link to comment
Share on other sites

Wills.WindowsAndWheels
21 hours ago, az57chevy said:

Nice job my man!

 

Thank you sir!

17 hours ago, Extender32 said:

Doing well and enjoying my ZR1 of course.  I break out the Meguires and my Porter Cable about twice a year to remove the light swirl marks, but nothing in great as detail as you go to.

 

If you still take care of your car as well as before than you likely don't need anything super extensive lol. A light polish with the PC for well maintained car is probably all she needs anyway :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...