VentureShield Protection

#1 EFE Z06

Low Speed Racer

Group: * Members *
Posts: 106
Joined: 20-January 07

Posted 24 July 2010 - 11:50 AM

Can anybody recommend a good place to install VentureShield protection on my front bumper, competitive pricing?

Thanks,
Ed

Velocity Vettes
www.velocityvettes.org

EFE Z06
Prescott, AZ

Velocity Vettes
http://www.freewebs.com/velocityvettes/

#2 Drewstein

Low Speed Racer

Group: * Members *
Posts: 608
Joined: 03-February 06

Posted 24 July 2010 - 11:57 AM

What's that stuff, the clear bra? If it is then go to Joe at Classic Gold. They have painted two of my vettes and also do the clear bra so they don't have to paint them again lol.

#3 Wishbone

Hi, I like to scoop poop

Group: Supporting Member
Posts: 874
Joined: 09-July 09

Posted 26 July 2010 - 03:12 PM

I install the venture shield clear bra for club members, what are you looking to get done?

Built and Designed by Buccaneer

#4 EFE Z06

Low Speed Racer

Group: * Members *
Posts: 106
Joined: 20-January 07

Posted 26 July 2010 - 03:47 PM

QUOTE (Wishbone @ Jul 26 2010, 03:12 PM) <{POST_SNAPBACK}>

I install the venture shield clear bra for club members, what are you looking to get done?

Are you a dealer for VentureShield or a factory trained installer?

If so, shoot me a message with your phone number, I'm looking for a dealer who I can recommend for all the new Corvettes that join our website.

Thanks,
Ed

EFE Z06
Prescott, AZ

Velocity Vettes
http://www.freewebs.com/velocityvettes/

#5 Wishbone

Hi, I like to scoop poop

Group: Supporting Member
Posts: 874
Joined: 09-July 09

Posted 26 July 2010 - 03:53 PM

QUOTE (EFE Z06 @ Jul 26 2010, 03:47 PM) <{POST_SNAPBACK}>

QUOTE (Wishbone @ Jul 26 2010, 03:12 PM) <{POST_SNAPBACK}>

I install the venture shield clear bra for club members, what are you looking to get done?

I am none of those, I am a member who does everything and has some talented hands. I have been installing for the ACE Fam thats all. Great prices, low cost, but NO WARRANTY because the warranty is only a lifetime warranty through Venture Shield and you would still have to pay the installer to take off the old kit and install the new kit...

Built and Designed by Buccaneer

#6 Eddie44

Do I look that stupid?

Group: Admin
Posts: 10,920
Joined: 22-April 04

Posted 26 July 2010 - 04:41 PM

Wishbone, PM me prices for 1/2 hood and whole hood. I'd like to get the new Vette done but price was holding me back. THX!

2009 cyber gray C6 coupe, Z51, A6
1966 Laguna blue C2 coupe numbers matching 300HP 327 4spd
2002 white/black C5 convertible (gone but not forgotten)
2006 black C6 coupe, Z51, A6 (gone as well)

#7 SLAMMER

I'M AWESOME WITH POWERTOOLS

Group: * Members *
Posts: 264
Joined: 14-February 10

Posted 26 July 2010 - 06:31 PM

QUOTE (Wishbone @ Jul 26 2010, 03:12 PM) <{POST_SNAPBACK}>

I install the venture shield clear bra for club members, what are you looking to get done?

My front drivers fender

#8 EFE Z06

Low Speed Racer

Group: * Members *
Posts: 106
Joined: 20-January 07

Posted 26 July 2010 - 06:36 PM

QUOTE (Wishbone @ Jul 26 2010, 03:53 PM) <{POST_SNAPBACK}>

QUOTE (EFE Z06 @ Jul 26 2010, 03:47 PM) <{POST_SNAPBACK}>

QUOTE (Wishbone @ Jul 26 2010, 03:12 PM) <{POST_SNAPBACK}>

I install the venture shield clear bra for club members, what are you looking to get done?

Shoot me an e-mail and we can talk. Link at Velocity Vettes website below.

Thanks,
Ed

EFE Z06
Prescott, AZ

Velocity Vettes
http://www.freewebs.com/velocityvettes/

#9 1jester

Low Speed Racer

Group: * Members *
Posts: 463
Joined: 25-May 07

Posted 26 July 2010 - 10:29 PM

QUOTE (EFE Z06 @ Jul 24 2010, 11:50 AM) <{POST_SNAPBACK}>

Can anybody recommend a good place to install VentureShield protection on my front bumper, competitive pricing?

Thanks,
Ed

Velocity Vettes
www.velocityvettes.org

Just leave it in the garage, Ed, and you wont need the shield. lol

#10 EFE Z06

Low Speed Racer

Group: * Members *
Posts: 106
Joined: 20-January 07

Posted 27 July 2010 - 01:27 AM

QUOTE (1jester @ Jul 26 2010, 10:29 PM) <{POST_SNAPBACK}>

QUOTE (EFE Z06 @ Jul 24 2010, 11:50 AM) <{POST_SNAPBACK}>

Can anybody recommend a good place to install VentureShield protection on my front bumper, competitive pricing?

Thanks,
Ed

Velocity Vettes
www.velocityvettes.org

Just leave it in the garage, Ed, and you wont need the shield. lol

That sure solves the problem, but it's those time when I take it out that I worry about!

This post has been edited by EFE Z06: 27 July 2010 - 01:41 AM

EFE Z06
Prescott, AZ

Velocity Vettes
http://www.freewebs.com/velocityvettes/

#11 Wishbone

Hi, I like to scoop poop

Group: Supporting Member
Posts: 874
Joined: 09-July 09

Posted 27 July 2010 - 03:56 PM

I had a great talk with Ed today what a great guy. He gave me the hook up with the owner of Lex international and I set up an account with him for all of our product needs with clear bra products YEAH....

So we should be gettting back on top of things here and getting some rubber on some peeps rides here in no time. PM me if you are looking at getting some rubber on your ride.

Built and Designed by Buccaneer

#12 EFE Z06

Low Speed Racer

Group: * Members *
Posts: 106
Joined: 20-January 07

Posted 06 August 2010 - 01:52 PM

I wanted to publicly thank Wishbone for the great job he did installing Ventureshield on my Z06. After arriving at his house in Goodyear within a few minutes other ACE members started showing up and within an hour there was almost a dozen vette enthusiast hanging out and having good conversations.

I was a little surprised when Wishbone asked me to pull my car in his garage and he started to do a complete pressure wash over the whole car, I was just expecting him to wipe down and clean the areas he was installing the film on, not so! He pressure washed the whole car including the wheels, a service way beyond my expectations! Thanks so much Robert!

He was well equipped with all the tools and liquids to install the VS and he proved he had the experience to do a good job, very meticulous! I had the front bumper, headlights, mirrors and rear brake intake vent areas done. He started around 6PM and finish around 9:30PM that night, then the remaining group went over to the Cracker Barrel for a bite to eat. Afterward Robert and I went back and did a final inspection before I headed back to Prescott around 11:30. I have to say I'm not used of the temperature in Phoenix and was going through tons of cold water Robert's wife (Angela) was so gracious to supply during the whole evening.

The service Wishbone offers to all the ACE members (without charge) is truly an act of love and I'm sure all that have taken advantage of his gifts have been blessed. Hope to see all you guys again soon in a future get together.

Grateful,
Ed Frias

This post has been edited by EFE Z06: 06 August 2010 - 01:55 PM

EFE Z06
Prescott, AZ

Velocity Vettes
http://www.freewebs.com/velocityvettes/

#13 Bigfoot99

I've never gotten to ride a SeaDoo :(

Group: Moderator
Posts: 11,167
Joined: 03-July 06

Posted 06 August 2010 - 07:36 PM

I have to agree, Robert has mucho heart and graciousness.

#14 Desertdawg

Orange Rules !!!

Group: Admin
Posts: 14,077
Joined: 11-April 04

Posted 07 August 2010 - 03:24 AM

Another awesome job by Robert, ACE thanks you dood!

08 Atomic Orange 4LT Z51 NPP LS7exhaust
98 Torch Red Convertible * SOLD
82 Collector Edition * SOLD
I don't have Attention Deficit Disorder. I just dont understand why I someti........ Hey! Look, a chicken!

#15 ChadC

I'm awesome and I had a hangnail

Group: * Members *
Posts: 6,330
Joined: 17-July 06

Posted 07 August 2010 - 04:40 AM

QUOTE (EFE Z06 @ Aug 6 2010, 01:52 PM) <{POST_SNAPBACK}>

The service Wishbone offers to all the ACE members (without charge) is truly an act of love and I'm sure all that have taken advantage of his gifts have been blessed. Hope to see all you guys again soon in a future get together.

amen brother

Codename Roxxane v3.0